QoS
About
Marking your packets with DSCP will enable you to implement a QoS policy on your network to give RTP and SIP traffic more priority. Keep in mind that just because you are marking the packets doesn't mean you have QoS. Your network needs to LOOK at the packets and honor the markings in order for this to work.
Click here to expand Table of Contents
NetFilter (IPTables)
You can set the RTP port range used by FreeSWITCH in $${conf_dir}/autoload_configs/switch.conf.xml
# Mark RTP packets with EF:
iptables -t mangle -A OUTPUT -p udp -m udp --sport 16384:32768 -j DSCP --set-dscp-class ef
# Mark SIP UDP packets with CS3:
iptables -t mangle -A OUTPUT -p udp -m udp --sport 5060 -j DSCP --set-dscp-class cs3
iptables -t mangle -A OUTPUT -p udp -m udp --dport 5060 -j DSCP --set-dscp-class cs3
# Mark SIP TCP packets with CS3:
iptables -t mangle -A OUTPUT -p tcp --sport 5060 -j DSCP --set-dscp-class cs3
iptables -t mangle -A OUTPUT -p tcp --dport 5060 -j DSCP --set-dscp-class cs3
# Mark SIP TLS packets with CS3:
iptables -t mangle -A OUTPUT -p tcp --sport 5061 -j DSCP --set-dscp-class cs3
iptables -t mangle -A OUTPUT -p tcp --dport 5061 -j DSCP --set-dscp-class cs3
#For CentOS/RedHat:
*mangle
-A OUTPUT -p udp -m udp --sport 5060 -j DSCP --set-dscp-class cs3
-A OUTPUT -p udp -m udp --dport 5060 -j DSCP --set-dscp-class cs3
-A OUTPUT -p udp -m udp --sport 16384:32767 -j DSCP --set-dscp-class ef
COMMIT
NetFilter (nftables)
table ip mangle {
chain output {
type route hook output priority -150; policy accept;
udp sport 16384-32768 ip dscp set ef
udp sport sip ip dscp set cs3
udp dport sip ip dscp set cs3
tcp sport sip ip dscp set cs3
tcp dport sip ip dscp set cs3
tcp sport 5061 ip dscp set cs3
tcp dport 5061 ip dscp set cs3
}
}
Windows
NT 6.1 and Later Releases
DSCP marking can be achieved under the system's local group policy named "Policy-based QoS". To reach that menu, you will need to enter the local group policy editor with administrator rights and navigate to the following:
Computer Configuration->Windows Settings->Policy-based QoS
You can set the policy to mark packets coming from FreeSWITCHConsole.exe that way.
Cisco
Sample Cisco Template for CE devices: http://cisconerd.wordpress.com/2012/09/13/qos-template/
End-to-end test script
See: https://github.com/xlab1/voip%5Fqos%5Fprobe
Cheat Sheet
Here is a pretty good guide for QoS: http://cisconerd.wordpress.com/2012/09/13/qos-cheatsheet/